| 出版物 |
Calculation of flow, heat transfer and evaporation during the electron beam cold hearth melting of Ti-6Al-4V alloy |
Calculation of flow, heat transfer and evaporation during the electron beam cold hearth melting of Ti-6Al-4V alloy |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-04-07 |
| 出版物 |
TA10 钛合金熔炼工艺的改进及性能分析 |
Smelting Improvement and Performance Analysis of TA10 Titanium Alloy |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-04-07 |
| 出版物 |
Fluid Flow and Heat Transfer during the Electron Beam Cold Hearth Remelting Process |
Fluid Flow and Heat Transfer during the Electron Beam Cold Hearth Remelting Process |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-04-07 |
| 出版物 |
退火温度对大口径 TC4 合金无缝管组织与性能的影响 |
Effect of annealing temperature on microstructure and mechanical properties of large diameter TC4 titanium alloy seamless tube |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-04-07 |
| 出版物 |
电子束冷床熔铸TC4合金的多道次热变形行为 |
Multi-pass hot deformation behavior of TC4 alloy prepared by electron beam cold hearth melting technology |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-04-07 |
| 出版物 |
钛合金电子束冷床炉熔炼过程中硬α-TiN夹杂的溶解去除理论分析 |
Theoretical analysis of dissolution and removal of hard α - tin inclusions in the melting process of titanium alloy in electron beam cooling bed furnace |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-04-07 |
| 出版物 |
Ti-4Al-2.5V-1.5Fe合金多道次热变形行为及微观组织演变 |
Multi-pass hot deformation behavior and microstructure evolution of Ti-4Al-2. 5V-1. 5Fe alloy |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-04-07 |
| 出版物 |
等离子球化钼粉 3D 打印工艺适配性研究 |
Study on the Suitability between Technological Parameters |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-03-30 |
| 出版物 |
nvestigation on heat transfer performance of corrugated tubes in low-temperature multi-effect falling-film evaporation |
nvestigation on heat transfer performance of corrugated tubes in low-temperature multi-effect falling-film evaporation |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-03-30 |
| 出版物 |
工业纯钛热轧及冷轧板表面缺陷研究 |
Research on surface defects of commercially pure titanium hot-rolled and cold-rolled plates |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-03-30 |
