国家材料腐蚀与防护科学数据中心
National Materials Corrosion and Protection Scientific Data Center
中文 | Eng 数据审核 登录 反馈
名称 : 烧结风箱烟气成分检测报告
英文名称 : Sintered bellows fume composition test report
材料 : 431
委托单位 : 首钢京唐钢铁联合有限责任公司
实验单位 : 首钢集团有限公司技术研究院
实验方法 : 烧结风箱烟气成分检测方法
实验设备 : 烟气分析仪
实验条件 : 按照烧结风箱烟气成分检测方法进行
说明 :

测试了360m2烧结机各风箱烟气成分,图中“停耐热风机”为普通烧结,“开耐热风机”为烟气循环烧结。由图可以看出:烟气中的SO2主要集中在10-19#风箱,在14#风箱附近达到峰值。比较来看,烟气循环烧结后烟气中的SO2峰值浓度提高。可以看出,烟气循环烧结后烟气中的SO2浓度出现了小幅度的富集,主要是由于烟气总量减少所致。SO2浓度一定程度的富集对于提高脱硫效率,实现SO2减排有利。

英文说明 :

The flue gas composition of each bellows of 360M2 sintering machine is tested. In the figure, "stop heat resistant fan" is ordinary sintering, and "turn on heat resistant fan" is flue gas circulation sintering. As can be seen from the figure, SO2 in flue gas is mainly concentrated in the 10-19# bellows and reaches its peak near the 14# bellows. In comparison, the peak concentration of SO2 in flue gas increases after flue gas cycle sintering. It can be seen that the concentration of SO2 in flue gas is enriched in a small range after flue gas recycling sintering, mainly due to the reduction of total flue gas. Enrichment of SO2 concentration to a certain extent is beneficial to improve desulfurization efficiency and achieve SO2 emission reduction.

数据来源 : 分析测试报告
附件下载
重点项目名称 : 钢铁流程绿色化关键技术-低排放的高效低耗烧结关键技术及应用示范数据集

关于国家科技资源服务平台

国家科技基础条件平台中心是科技部直属事业单位,致力于推动科技资源优化配置,实现开放共享,其主要职责是:承担国家科技基础条件平台建设项目的过程管理和基础性工作;承担国家科技基础条件平台建设发展战略、规范标准、管理方式、运行状况和问题的研究,以及国际合作与宣传、培训等工作;承担科技基础条件门户系统的建设与运行管理工作;参与对在建和已建国家科技基础条件平台项目的考核评估和运行监督工作。

国家科技资源服务平台相关网站


国家材料腐蚀与防护科学数据中心

国家高能物理科学数据中心

国家基因组科学数据中心

国家微生物科学数据中心

国家空间科学数据中心

国家天文科学数据中心

国家对地观测科学数据中心

国家极地科学数据中心

国家青藏高原科学数据中心

国家生态科学数据中心

国家冰川冻土沙漠科学数据中心

国家计量科学数据中心

国家地球系统科学数据中心

国家人口健康科学数据中心

国家基础学科公共科学数据中心

国家农业科学数据中心

国家林业和草原科学数据中心

国家气象科学数据中心

国家地震科学数据中心

国家海洋科学数据中心